Tissue Embedding Media
Electron Microscopy Sciences BEEM Flat Embedding Mold
Molded from polyethylene. The critical surfaces of the mold are transparent, facilitating accurate specimen orientation through bottom illumination. Molds are reusable and each mold is supplied with a protective box.
Electron Microscopy Sciences TFM™ Tissue Freezing Medium, Red 4 OZ
An embedding matrix for frozen sections. TFM is an ultra pure formulation of water-soluble glycols and resins that provides a solid bond between the tissue and the object holder with the following features: less ice artifacts, less curling, and faster freezing.
Color: Red
Electron Microscopy Sciences DER 332/732 Kit
Three different mixtures: one for relatively soft blocks, another for harder blocks for collagenous tissue, and a tougher one if required. Reference: Lockwood, W.R. Anatomical Record, 150, 129 (1964).
*Please note that wherever DMP-30 is listed as the accelerator in our embedding media kits you have the option to use BDMA. BDMA is less viscous, has a longer shelf life, and offers better penetration. When using BDMA in place of DMP-30 you must vary the amount: DMP-30: 1.5-2%; BDMA: 2.5-3%.
Electron Microscopy Sciences Meltmount™ Slide Mounting Media Quick-Stick™ 1.680
Cargille Meltmount (optical quality) is a series of mounting media which are specifically formulated for use in microscope slide mounting and in other optical coupling applications.
< Use Meltmount for instant thermal mountants that require "no-oven-time" and are thermally reversible for sample retrieval or re-orientation. Meltmounts are PBC free and contains no solvents. Cleanup in toluene. Fluid at 65 degree C. It is a direct replacement for old mountant mediums (Canada Balsam, Aroclor 5442, Naphrax...) It has a refractive index (nD @25 deg C) of 1.680 and an Abbe V dispersion of 25, making it appropriate for mounting Amosite and Crocidolite asbestos.
Refractive index: 1.680
Electron Microscopy Sciences Meltmount™ Slide Mounting Media Quick-Stick™ 1.704
Cargille Meltmount (optical quality) is a series of mounting media which are specifically formulated for use in microscope slide mounting and in other optical coupling applications.
< Use Meltmount for instant thermal mountants that require "no-oven-time" and are thermally reversible for sample retrieval or re-orientation. Meltmounts are PBC free and contains no solvents. Cleanup in toluene. Fluid at 65 degree C. It is a direct replacement for old mountant mediums (Canada Balsam, Aroclor 5442, Naphrax...) It has a refractive index (nD @25 deg C) of 1.704 and an Abbe V dispersion of 24, similar to Naphrax.
Refractive index: 1.704
Electron Microscopy Sciences Gelatin Capsule Size 1
Natural, hard gelatin capsules. To be used as an embedding mold for water miscible resins, or resins which need to be cured by transmitted light. Gelatin capsules dissolve or disintegrate within 5 minutes when immersed in a 0.5% HCl solution at 36-38 degree C, within 2 minutes in water at 37 degree C or in artificial gastric juice.
OAL: 19.00 mm
Diameter: 6.63 mm
Volume: 0.68 mL
Electron Microscopy Sciences Gelatin Powder Type B 75 Bloom, 3.5-5.0 (1% in H2O) pH 100 GR
F.W. 60000
Type A is from Porcine skin (acid cured tissue). Type B is from Bovine skin (base cured tissue). The strength of the gel is based on the bloom number. The higher the bloom number the stronger the gel. Used as a combination Acrylamide-Gelatin-Jung resin for cryosectioning of large and soft tissues (eggs, fishes, insects) Hartmann, R. (1984). A new embedding medium for cryosectioning eggs of high yolk and lipid content. Eur. J. Cell Biol., 34:206 Used to From Bovine skin (base cured tissue).
pH: 3.5-5.0 (1% in H2O)
Electron Microscopy Sciences BEEM Embedding Capsules, Size 3
These capsules, made from polyethylene, produce blocks with a 5.6 mm O.D. and a pyramid tip. Comes complete with a hinged cap.
Electron Microscopy Sciences BEEM Embedding Capsule Bottle Neck Tip
Specially shaped capsules are designed to overcome commonly encountered embedding problems; such as, small or thin elongated specimens and powder samples. These capsules are also good for centrifuging precipitated matters and allows for less trimming. BEEM Is A Registered Trademark of Better Equipment For Electron Microscopy, Inc. Bottle neck capsule produces a 7.9mm OD block with a hemihyperpoloid (rather than faced) tip.
Alkali Scientific Histoplast Paraffin Wax Ultra-
Alkali Scientificpremium paraffin wax blended with purified plastic polymers is specifically designed for general use and all histology applications With a melting point of 56C to 58C it ensures optimal performance for detailed sectioning tasks The DMSO-free formulation enhances safety and reliability minimizing compression and cell disruption to produce high-quality slides This wax supports ultra-thin sectioning down to 2 m with exceptional precision Its convenient pearl-shaped granules simplify handling and melting making it a versatile and efficient choice for a variety of laboratory protocols High-quality paraffin wax with purified plastic polymers Suitable for general use and all histology applications DMSO-free for safer use and improved performance Ensures ultra-smooth cutting with minimal compression and cell disruption Supports precise sectioning as thin as 2 m for detailed results Pearl-shaped granules for effortless handling and efficient melting Melting point of 56C
Sigma Aldrich Fine Chemicals Biosciences MINERAL OIL,LIGHT OIL 100ML
Mineral oil,light oil (neat), BioReagent, suitable for mouse embryo cell culture
Buehler Release Agent, 4oz
This item has a minimum qty of 10 per supplier requirements.
Liquid release agent for easier removal of mounts from castable molds or compression mounting presses.
Polysciences, Inc. Batsons #17 Anatomical Corrosion Kit
Low viscosity, acrylic-based resin system for room temperature preparation of anatomical corrosion castings. After hardening, tissue is corroded away by caustic solution, yielding a durable, scientifically exact model for anatomical study.
Ted Pella Inc Eponate 12™ Resin | 75-56-9 | MFCD00005126 | 450g
Eponate 12™ Resin |MW: 58.079 | 75-56-9 | MFCD00005126 | 450g